WANTED - Faber 68cf (Slim 72's) cylinders
Posted: Sat May 14, 2016 4:57 pm
I'm on the hunt for Faber 68cf steel cylinders (originally marketed by ScubaPro as "Slim 72's").
These are not your common variety 72cf steels. They are 19" circumference (6" diameter), 25" tall and have a working fill pressure of 3000 psi. They were manufactured with a + rating and the cylinder markings will display the following data:
"SCUBAPRO DOT-3AA 3000-91/9050/" and "M8303 FABER italy"
I'm looking for one or more of these Italian steels in working condition. Not concerned about the condition of the valves or the cosmetics of the cylinder, as long as any rust is only surface and the cylinder has passed hydro in the last 5 years (10 years if they haven't been used in the last 5+ years). Please, no "cave filled" cylinders.
These are not your common variety 72cf steels. They are 19" circumference (6" diameter), 25" tall and have a working fill pressure of 3000 psi. They were manufactured with a + rating and the cylinder markings will display the following data:
"SCUBAPRO DOT-3AA 3000-91/9050/" and "M8303 FABER italy"
I'm looking for one or more of these Italian steels in working condition. Not concerned about the condition of the valves or the cosmetics of the cylinder, as long as any rust is only surface and the cylinder has passed hydro in the last 5 years (10 years if they haven't been used in the last 5+ years). Please, no "cave filled" cylinders.