Can you help me with my zipper?
- sheahanmcculla
- I've Got Gills
- Posts: 1387
- Joined: Wed Jun 13, 2007 11:54 am
Can you help me with my zipper?
Hey boys and girls, quick question. Where can I get my zipper fixed on my BCD? It broke off in Hawaii, and I would like to get it fixed. All the teeth are good, just the zipper dohicky thing broke.
Any ideas?
Thanks
Sheahan
Any ideas?
Thanks
Sheahan
Re: Can you help me with my zipper?
You might take a look at Seattle Fabrics,
http://www.seattlefabrics.com/zippers.h ... %20sliders
They might have what you need.
Good Luck!
Mike
http://www.seattlefabrics.com/zippers.h ... %20sliders
They might have what you need.
Good Luck!
Mike
Re: Can you help me with my zipper?
Depending on the brand and where you bought it you might be able to get it replaced free or at a reduced price. If your real handy you might be able to fix it. Check your local canvas shops. They might have one that you can get or they Might replace it for you but that could be pricey cause most have a minimum labor charge that is not cheap.
If not it's a good time to look at a BP/wing! LOL
Beat ya to it Sounder!
If not it's a good time to look at a BP/wing! LOL
Beat ya to it Sounder!
Last edited by Dusty2 on Tue Jul 21, 2009 8:15 pm, edited 1 time in total.
http://dustys-lights.com/, An awesome light at an unbelievably low price
Dusty's Lights on facebook
http://underthesound.smugmug.com/
Dusty's Lights on facebook
http://underthesound.smugmug.com/
Re: Can you help me with my zipper?
DSS Torus wings don't have zippers, and don't really need them. In addition to top-shelf external quality, the bladder material used in DSS wings is almost twice as thick as traditional bladders.Dusty2 wrote:Depending on the brand and where you bought it you might be able to get it replaced free or at a reduced price.
If not it's a good time to look at a BP/wing! LOL
Beat ya to it Sounder!
...but he wasn't asking and a bp/w.
+1 for contacting the manufacturer first, then checking out Seattle fabrics.
GUE Seattle - The official GUE Affiliate in the Northwest!
- sheahanmcculla
- I've Got Gills
- Posts: 1387
- Joined: Wed Jun 13, 2007 11:54 am
Re: Can you help me with my zipper?
Thanks, that should work.Rockfish wrote:You might take a look at Seattle Fabrics,
http://www.seattlefabrics.com/zippers.h ... %20sliders
They might have what you need.
Good Luck!
Mike
Dusty2 wrote: Depending on the brand and where you bought it you might be able to get it replaced free or at a reduced price. If your real handy you might be able to fix it. Check your local canvas shops.
Ok maybe I'll try a canvas shop. I don't know about sending it back to aqualung...the LDS said find a seamstress
I have one and love it! Gotta get rid of this BCDusty2 wrote: If not it's a good time to look at a BP/wing! LOL
Beat ya to it Sounder!
I will try an email, thanks!Sounder wrote: +1 for contacting the manufacturer first, then checking out Seattle fabrics.
Re: Can you help me with my zipper?
I broke a zipper thingy on a wetsuit and was able to fix it... ok, what I really mean is I was able to get the parts and have my mother fix it. She's quite the sewing ninja and she used special nylon thread, black of course.
Yeah, my mommy had to fix my wetsuit.
Anyway, it was do-able by someone who knew what they were doing. If the manufacturer can't do it, I would go straight to a seamstress and see what they say. They may or may not be able to help though - it takes a heavy-duty machine. KME Drysuits might be another resource - I dunno.
Yeah, my mommy had to fix my wetsuit.
Anyway, it was do-able by someone who knew what they were doing. If the manufacturer can't do it, I would go straight to a seamstress and see what they say. They may or may not be able to help though - it takes a heavy-duty machine. KME Drysuits might be another resource - I dunno.
GUE Seattle - The official GUE Affiliate in the Northwest!
- sheahanmcculla
- I've Got Gills
- Posts: 1387
- Joined: Wed Jun 13, 2007 11:54 am
Re: Can you help me with my zipper?
So you have to rip the old teeth out? I just figured they had a tool that could put the new handle part on. Dang this is more complicated then I thought.
Re: Can you help me with my zipper?
Well found this on youtube and is kinda what I was thinking. I am sure most fabric stores sell these zippersliders.
http://www.youtube.com/watch?v=IeSgGFQY ... re=related
http://www.youtube.com/watch?v=IeSgGFQY ... re=related
Jeff Castor
Re: Can you help me with my zipper?
If for some reason you don't feel comfortable replacing a zipper slide I highly recommend Rainy Pass Repair in Fremont. They do top notch repair for outdoor gear (REI sends them lots of warranty work).
"Just to be clear, doing the Diamond Knot requires at the minimum double IPAs to be DIR." - MattleyCrue
"Mmmm....... Oreos!
They didn't look too good when I was spitting in my mask for dive #2!" - cardiver
"Mmmm....... Oreos!
They didn't look too good when I was spitting in my mask for dive #2!" - cardiver
Re: Can you help me with my zipper?
Sheahan, post a pick of what's wrong, maybe I'm miss understanding the issue.
"Screw "annual" service,... I get them serviced when they break." - CaptnJack (paraphrased)
"you do realize you're supposed to mix the with water and drink it, not snort the powder directly from the packet, right? " - Spatman
"you do realize you're supposed to mix the with water and drink it, not snort the powder directly from the packet, right? " - Spatman
- enchantmentdivi
- Amphibian
- Posts: 807
- Joined: Sun Nov 19, 2006 6:24 am
Re: Can you help me with my zipper?
If I am interpretting what you wrote correctly, was it just the zipper pull that broke and not the zipper itself? If so, just use a ziptie to make a loop to fashion a new one. It ain't pretty, but it works just fine. I did that on my weight pocket on my Zeagle about 6 years ago, and it's still going strong.
Jenn
- sheahanmcculla
- I've Got Gills
- Posts: 1387
- Joined: Wed Jun 13, 2007 11:54 am
Re: Can you help me with my zipper?
I think this is what I needed, Thankspogiguy05 wrote:Well found this on youtube and is kinda what I was thinking. I am sure most fabric stores sell these zippersliders.
http://www.youtube.com/watch?v=IeSgGFQY ... re=related
Here you go Jake:
I looked for steak knives last night but haven't found any yet,
Re: Can you help me with my zipper?
Yep, I think that youtube video and seattle fabrics will have you good to go.
"Screw "annual" service,... I get them serviced when they break." - CaptnJack (paraphrased)
"you do realize you're supposed to mix the with water and drink it, not snort the powder directly from the packet, right? " - Spatman
"you do realize you're supposed to mix the with water and drink it, not snort the powder directly from the packet, right? " - Spatman